Back to blog
Compliance23 July 20269 min read

HGV operator disc and plating certificate: what DVSA checks is in your cab at a roadside stop

DVSA pulled my Volvo at Knutsford. The operator disc in the windscreen was expired. I had a current one — on my desk. Here's what must be displayed and where.

HGV operator disc and plating certificate: what DVSA checks is in your cab at a roadside stop

DVSA pulled one of my Volvos at Knutsford services on a Thursday afternoon. The examiner walked to the nearside windscreen and looked at the operator's disc in its holder. The disc was expired — by three months. The current one, issued when I'd renewed the licence undertakings, was sitting in an envelope on my office desk.

We got a prohibition on the spot. It was removed when someone drove out with the correct disc and fitted it. But the OCRS entry stayed. And the embarrassing part is that it was entirely avoidable. Here's what the windscreen must show, what the cab must carry, and the system that stops this happening to you.

The operator's disc: the first thing the examiner looks at

Every vehicle authorised under a goods vehicle operator's licence must have a valid operator's disc displayed at all times while it's in use. This is a legal requirement under the Goods Vehicles (Licensing of Operators) Regulations 1995, Regulation 23.

The disc must be fixed to the vehicle and exhibited in a legible condition. For vehicles with a front windscreen — which covers every truck you're likely to be running — the disc must be positioned on the near side and near the lower edge of the windscreen, with the obverse side facing forwards. And it must be carried in a waterproof container.

"Carried" isn't the right word, actually. The regulation says "fixed to, and exhibited in." It must be visible from outside the vehicle. It's not enough to have it in the glovebox, behind the visor, or tucked into the door pocket. It must be in the prescribed position, readable from outside, at all times the vehicle operates.

What the disc actually shows — and what the colour means

The disc shows your operator name, O-licence number, the vehicle registration mark, and the expiry date. It also shows whether the licence is standard or restricted, and for standard licences, whether it covers national-only operations or both national and international.

The colour of the disc is significant. Standard International licences carry a green disc. Standard National licences carry a blue disc. Restricted licences carry an orange disc. This matters because the colour tells the examiner at a glance what the vehicle is authorised to do — and a vehicle running international work on a blue (national-only) disc is technically out of scope for that operation.

Don't mark, write on, or alter the disc. Regulation 23(4) prohibits this. If a disc is damaged or becomes illegible, apply for a replacement rather than trying to fix it.

Expired disc: same result as no disc

An expired disc — one where the expiry date has passed — is treated the same as no disc for enforcement purposes. Operating with an expired disc is an offence. The prohibition follows immediately at a roadside check, and the OCRS entry hits the same way.

This catches operators who've renewed their licence but not got the new disc into the vehicle. Renewal paperwork comes in, new discs go to the office, someone files them, and nobody updates the vehicles. Weeks pass. Then a roadside check.

When new discs arrive: they go into the vehicles the same day. Not the filing cabinet. The vehicle. Make this a hard rule in your depot — whoever receives the disc envelope from the TC's office is responsible for ensuring the discs reach the cabs within twenty-four hours.

The ministry plate (VTG 6A): in the cab, fixed, readable

Separate from the operator's disc is the ministry plate — the VTG 6A for goods vehicles, or the VTG 6T for trailers. This is a physical plate, typically metal or durable card, that shows the vehicle's authorised weights: gross vehicle weight, train weight if applicable, and the maximum weight for each axle.

The ministry plate must be displayed in the vehicle's cab — securely fixed, clear enough to read, and in a position that's easy to see. This is the DVSA guidance on plates and plating certificates. For trailers, the VTG 6T must be displayed on the trailer's chassis.

The plate matters because it's the legal reference for the vehicle's weight limits. If DVSA want to cross-check the weights they've measured against your authorised limits, the plate is where that starts. A plate that can't be read because it's behind a seat, painted over, or missing is a documentation failure.

The plating certificate (VTG 7A): this one doesn't have to be in the cab

This is the distinction most operators — including me, before I checked the legislation — get wrong. The paper plating certificate (VTG 7A for vehicles, VTG 7T for trailers) doesn't have to travel with the vehicle. DVSA guidance is explicit: keep it with the vehicle's paperwork in the office, or with the vehicle. Either is acceptable.

So the certificate can be in a filing cabinet at your yard. That's fine. What must be in the cab is the physical plate (VTG 6A) — the metal or durable display showing the weight information. The paper version is the record; the physical plate is the display.

Know the difference. Brief your drivers on it. And make sure the physical plate is actually fixed in the cab of every vehicle, because that one — unlike the paper certificate — is a cab requirement.

The annual test certificate: keep it in the vehicle

The annual goods vehicle test certificate — the HGV equivalent of an MOT certificate — confirms that the vehicle passed its most recent test at an Authorised Testing Facility. Unlike the paper plating certificate, it's good practice to keep the annual test certificate in the vehicle. If DVSA ask about it at a roadside check, having it immediately available avoids delays and demonstrates good document control.

Annual tests for goods vehicles are carried out at ATFs — these are specific approved sites, not general MOT test stations. After passing, the certificate is issued by DVSA. Keep it from the date of issue until the next test certificate replaces it.

Check the certificate date when a vehicle comes back from test. File the new one in the cab before the vehicle goes back on the road. If the vehicle fails its test, it doesn't get a current certificate — which means it can't operate until it passes a retest.

What DVSA check at a roadside stop

At a standard roadside check, the examiner will look at the operator's disc in the windscreen before they've even spoken to the driver. They can read the expiry date and the registration from outside the vehicle. If it's expired, or missing, or clearly not matching the vehicle registration, you have a problem before the conversation starts.

Inside the cab, they may ask to see the driver's licence, the driver's tachograph records (current day plus up to twenty-eight days back), and the ministry plate. They have the power to ask for any document relevant to the vehicle's authorisation and roadworthiness.

The examiner can issue a prohibition for documentation failures without inspecting the vehicle mechanically. Missing or expired operator disc: prohibition. Ministry plate not readable: prohibition. These are administrative failures, not mechanical ones — but they carry the same OCRS weight as a brake or tyre finding.

Trailers: separate docs for each unit

If you run articulated or drawbar combinations, the trailer has its own documents. The VTG 6T plate must be on the trailer's chassis. The trailer's plating certificate (VTG 7T) can be in the office. And the trailer's annual test certificate should travel with the trailer.

Mixed fleets catch operators out here. The trailer on this particular job was tested last spring — but the certificate is back at the yard, not attached to the trailer. The trailer plate is fine. The annual test cert is fine. But it's in the filing cabinet, not on the trailer, and now DVSA are asking for it.

My system: laminated wallet fixed to the inside of each trailer headboard. Annual test certificate inside, updated at each test. Driver's vehicle folder holds the tractor's documents. Two separate places, both managed separately, both checked on departure from the yard.

The ninety-second check that prevents OCRS entries

Add two items to your morning walkaround checklist — or your departure check for any vehicle. First: look at the operator's disc. Is it the right vehicle registration? Is the expiry date current? Second: is the ministry plate visible and readable in the cab?

Neither of these checks requires opening a panel or getting under the vehicle. Ninety seconds. Two yes/no answers. Both of them can save you from an OCRS entry that would otherwise cost nothing to prevent.

The mistake at Knutsford was an office process failure. Disc arrived, wasn't put in the vehicle, and nobody checked for it. Three months of running with an expired disc before DVSA caught it. The check would have caught it on day one.

What about the driver's documents?

Beyond the vehicle documents, there are driver-level documents that DVSA may ask to see at a roadside stop.

The driver must carry their Driver CPC card (DQC) while driving professionally — a separate requirement from the vehicle documents, but something DVSA check at the same stop. If the DQC is expired or missing, that's a separate offence from any vehicle document issue. Both get checked, both create separate records.

The driver's Group 2 licence must be valid for the vehicle class they're driving. DVSA can request sight of the licence at a roadside stop, though they can also verify it electronically. A driver who's let their medical expire, lost their Group 2 entitlement, or is driving a vehicle above their licence category is operating illegally — and the operator who put them in that cab carries liability under the O-licence undertakings.

Tachograph records for the current day and the previous twenty-eight days must also be available in the cab. This means the driver card (with its records) or, if the card is lost, the manual printout records that substitute for it. DVSA can ask for these at any roadside check, and not being able to produce them is a records offence.

Colour-coded checks: a simple system for fleet managers

The simplest system I've run for keeping cab documents current is a colour-coded card for each vehicle, updated at each maintenance interval.

Each vehicle's card shows: operator disc expiry date, ministry plate status (fixed and readable — yes or no), annual test date and next test due. The card lives in the cab folder alongside the annual test certificate. When any item comes due — new disc, next test, plate replacement — it's flagged on the card a month in advance.

It sounds low-tech. It is. But a paper system that a driver can check in thirty seconds is better than a digital system that nobody looks at until a roadside examiner is standing outside the window.

What to do if a disc or plate is damaged or lost

Operator discs can be replaced via the VOL (Vehicle Operator Licensing) online service — the same system where you manage your O-licence. If a disc is damaged, worn, or lost, log into VOL and request a replacement. The replacement disc is issued and mailed out; keep a record of the date you requested it and don't operate the vehicle without a disc while the replacement is in transit if you can avoid it.

If the ministry plate (VTG 6A) is damaged or becomes unreadable, DVSA can issue a replacement. The relevant regulation (Goods Vehicles (Plating and Testing) Regulations 1988, Regulation 41) sets out the replacement process; there's a fee of £13 for replacement plates. A damaged, unreadable plate isn't compliant — the regulation requires the plate to be "clear enough to read." Get it replaced rather than leaving an illegible plate in the cab.

DVSAO-LicenceHGVOperator DiscPlating CertificateRoadside

Run a fleet that has to keep DVSA happy?

FleetPad replaces walkaround paperwork, defect logs, and PMI records with one system the transport manager actually reads.