JAUPT-approved Driver CPC training: choosing modules that hold up when DVSA checks
Not every 'Driver CPC course' counts toward your drivers' 35 hours. I've had drivers turn up with certificates that weren't worth the paper they were printed on. Here's how the approval system works.

Driver CPC periodic training is one of those areas where operators assume it's sorted because the driver has certificates. It often isn't. I had a driver last year — good bloke, ten years on the road — turn up with attendance records for three courses he'd done through a local training company. Logged none of them. Not one hour on his DQC record.
Turned out the company running the courses had lost their DVSA approval status eight months earlier and either didn't know or didn't tell anyone. Forty-five hours of training, just — gone. Driver's CPC lapsed. Couldn't legally drive for us until he'd worked through a reinstatement process. Three weeks of operational disruption that cost considerably more than any training fee.
So yes. This matters. Let me explain why it happens and how you avoid it.
The 35-hour requirement: what it actually means
Every professional LGV or PCV driver needs 35 hours of periodic training over each five-year cycle. The five-year clock runs from when they first got their CPC — not from a fixed calendar date, so different drivers in your fleet will have different expiry dates. Seven hours a year is what DVSA recommends and what training providers sell against, but the law requires 35 hours over the five years. You could do all 35 in the last six months of the cycle if you had to. Bad planning, but technically compliant.
What you can't do is let the cycle expire with hours still outstanding. A driver whose DQC runs out isn't just out of date — they can't legally drive professionally until they've reinstated their qualification. That process takes time. Time you generally don't have when it's a key driver and you've got deliveries scheduled.
JAUPT is now part of DVSA
For years, course approvals ran through JAUPT — the Joint Approvals Unit for Periodic Training. A lot of operators still refer to courses as "JAUPT-approved" and aren't wrong to, but JAUPT merged into DVSA in January 2021. Course approvals now come directly from DVSA. The process is the same; the letterhead changed.
What this means practically: DVSA holds the approved course list, DVSA processes new approvals (roughly 15 working days), and DVSA can revoke approvals. A training company whose DVSA approval lapses or gets withdrawn can no longer run compliant periodic training, and hours from their sessions after that point won't register. That's exactly what happened to my driver's training company.
How approval actually works — and what can go wrong
A training provider applies to DVSA for each individual module separately, plus a combined course application. The course content has to map to the Driver CPC syllabus — they can't just run any five hours of transport-flavoured slides and call it approved. DVSA wants to see, explicitly, which syllabus sections each part of the course covers.
The approval is module-specific AND centre-specific. A trainer who runs approved courses for Company A doesn't carry that approval with them if they go freelance or join Company B. The company holds the approval, not the individual. This is a source of genuine confusion in the market — freelance trainers who were previously employed by an approved centre sometimes continue selling courses after leaving, in good faith, not realising their personal delivery isn't independently approved.
Ask the training company for their DVSA course approval reference. Not the trainer's credentials, not a vague "we're JAUPT-approved" statement — the specific DVSA reference for the specific module you're booking. A legitimate provider will have this to hand immediately. Any hesitation on that question is a signal.
The e-learning rule that catches fleets out
Standard Driver CPC courses can include e-learning. Fine. An International course can even be entirely online. But modular courses — the 3.5-hour blocks that fleets use to spread training over time — cannot include e-learning at all. DVSA is explicit on this: modular courses are classroom or practical delivery only.
Modular training is popular for exactly the right reasons. A driver does one 3.5-hour module in October, another in February, builds their 35 hours across five years without blocking out full days. That flexibility is real and the approach is fine. The e-learning restriction on modular training is also real, and it's the bit suppliers don't always make clear.
I've seen operators sold "modular packages" that included online pre-reading or e-learning components, not realising that the modular format doesn't allow it. The hours didn't count. Back to the manual check and a wasted afternoon trying to work out why the DQC record didn't update.
International versus National CPC — it matters for European runs
There are two flavours of periodic CPC: International and National. For drivers who cross into Europe — France, Germany, Benelux, wherever — only International CPC modules count toward their 35-hour requirement. Mix in National modules and you end up with a National DQC that's valid for UK-only driving. International routes require the International qualification.
For purely domestic fleets this doesn't arise. But if you have drivers doing both UK and European work — even occasionally — their training portfolio needs to be entirely International modules. Check this when drivers first go international, not after they've accumulated fifteen hours of National training that you now have to discard from the calculation.
Checking the record yourself
Drivers can check their own CPC hours at gov.uk/checkdrivercpc. Takes about thirty seconds. The number of hours logged, the expiry date, and whether any specific sessions have registered are all visible there. I run this check for every driver in my fleet every quarter — takes ten minutes across the whole team.
If a driver attended a course and the hours don't appear within about a week, something has gone wrong. The training centre has five working days to submit attendance records. If they've missed that deadline, contact the centre first — they should be able to look up the submission reference and confirm or refile. Don't leave it more than two weeks before chasing. Hours that haven't been submitted promptly have a habit of disappearing into a gap that takes months to resolve, and the resolution always seems to happen when the DQC is already close to expiry.
Fleet scheduling and the five-year cliff edge
The worst time to discover a driver is twenty-eight hours short is when there are six weeks left in their cycle. Six weeks is not long when you're trying to fit seven hours of approved training around delivery schedules, holidays, and the training centre's own availability.
I track every driver in a simple spreadsheet — their DQC expiry, current hours logged, rough target per quarter to stay on pace. When anyone drops more than two hours below target for where they should be in the cycle, I put them in the next available booking. It's not sophisticated but it prevents the cliff-edge problem entirely. Training centres with good availability and reasonable pricing aren't hard to find; the difficulty is always leaving it too late and having to pay emergency rates for the only available session.
Choosing modules that actually help
Seven hours per driver per year is a compliance obligation. It can also be useful, if you pick modules that relate to what your drivers actually do.
Modules on load security, dangerous goods awareness, fuel economy, and drivers' hours aren't just compliant — they address real operational risks. A driver who comes back from a properly delivered load security module having understood EN12195 strapping requirements is less likely to receive a load-related prohibition at the roadside than one who sat through a generic health and safety session and remembered nothing by Wednesday.
Talk to your approved training provider about what's available and what maps to your fleet's profile. Ask for the syllabus reference for each module they recommend. Use that conversation to filter out providers who can't answer the question — the good ones know their modules well and can explain exactly which compliance area each one addresses. That knowledge is part of what you're paying for.
New drivers and the CPC check at hire
Every new driver — employed, agency, or self-employed contractor — needs a valid DQC before they drive commercially for you. Not "valid by the end of the month." Valid now. Check it before they get in a vehicle.
Agency drivers in particular arrive with varying levels of paperwork hygiene. Some are immaculate. Others have a DQC card in their wallet they haven't looked at since they got it. The card can look fine and still be close to expiry. The card reader check and the gov.uk lookup take sixty seconds. If the DQC comes back invalid or expired, the driver doesn't drive until it's resolved. That's not harsh — that's the law, and it's your licence on the line not theirs.
Self-employed drivers can complicate this further. A self-employed HGV driver who's been doing local agricultural work under a domestic licence exemption, and is now looking to add commercial haulage runs, may not have kept their periodic training current because they didn't need it for their previous work. That gap is their problem to solve, but you need to know it exists before you put them on a route.
What reinstating a lapsed DQC actually involves
If a driver misses their cycle end date — their 35 hours aren't complete when the DQC expires — they have to complete the outstanding training and apply for a new DQC before they can legally drive commercially again. There's no grace period. The DQC expires; they stop being qualified; they can't drive.
Reinstatement doesn't mean starting a completely fresh 35-hour block. It means completing the outstanding hours to satisfy the previous cycle requirement, then applying for a new DQC. DVSA processes the card application. The card doesn't issue instantly — there's a processing time to factor in, during which the driver has completed the training but doesn't yet have the physical card. There's a way to get a temporary acknowledgement for roadside purposes while the card is in production, but it involves a specific process through DVSA and the driver needs to follow it.
The practical implication for fleet managers: a driver who announces that their DQC expired last week is going to be off commercial work for at minimum a few weeks while they complete training, apply, and wait for the card. That's not a sudden crisis you can fix in a day. The quarterly tracking system is the thing that prevents this from being a surprise at all.
The transport manager's responsibility in all of this
DQC management sits squarely in the transport manager's compliance obligations. An O-licence operator using drivers without valid DQCs is in breach of the operator licence undertakings. If DVSA discover it — through a roadside stop, a premises visit, or a complaint — the operator faces enforcement action, and the transport manager's competence is called into question alongside it.
External transport managers who are managing driver files need to have DQC expiry dates in their monitoring systems, the same way they track driving licence endorsements and driver card download schedules. It's not optional and it's not someone else's job. If the transport manager hasn't seen a driver's current DQC record, they don't know whether that driver can legally work.
Running a compliant fleet means knowing, at any point, that every professional driver currently on the road has a valid DQC, is within their training cycle, and has their hours recorded. That knowledge comes from having systems that track it rather than hoping someone would have mentioned it if there was a problem.