Right-to-work checks for HGV drivers: what fleet operators must check, keep, and repeat
I inherited a fleet. Three drivers had never had a right-to-work check done. The penalty is up to £60,000 per illegal worker. Here's what the check covers.

Three drivers, no right-to-work records
When I joined a new operator as TM in 2021, one of the first things I did was audit the personnel files. Good compliance practice — licences, CPC cards, medical certificates, all the usual checks. Three drivers had no right-to-work record. None. No copy of a passport, no share code reference, nothing. They'd been employed for between two and five years. All three turned out to have valid right to work — we retrospectively checked and documented it — but we'd been exposed without knowing it.
The civil penalty for employing someone who doesn't have the right to work in the UK is up to £60,000 per illegal worker, per the current GOV.UK guidance. That's not a fine with wiggle room — it's a per-head figure. If you have three drivers with no valid check on file and enforcement knocks on the door, you're looking at a potential liability of £180,000 before any criminal exposure is considered.
And unlike some compliance areas where DVSA is the enforcement body, right-to-work penalties come from the Home Office. They're separate from your OCRS, your O-licence risk, and your Traffic Commissioner relationship. They're an additional exposure that fleet operators tend to think of as HR's problem. It isn't just HR's problem.
Who needs a right-to-work check
Every person you employ in England, Wales, and Scotland before they start work. Not some employees, not just foreign nationals — every employee, including British citizens. The check is a universal requirement under the Immigration, Asylum and Nationality Act 2006 as amended by the Immigration Act 2014 and subsequent orders.
For fleet operators, this covers:
- HGV and LGV drivers on your payroll
- Transport office staff, schedulers, and planners
- Workshop mechanics employed by you
- Warehouse and loading staff
- Any other person on your payroll
Agency workers supplied to you through a compliant temporary work agency don't require you to do a right-to-work check — the agency holds that obligation for their own workers. But if you move someone from agency supply onto your own payroll, you need to conduct your own check at the point of employment.
What a right-to-work check involves
There are three routes to a valid right-to-work check: a manual document check, an online share-code check, or a check via an Identity Service Provider (IDSP) using digital identity verification.
Manual document check: You check an original document from the approved lists, satisfy yourself it's genuine and belongs to the person presenting it, take a clear copy, and record the date of the check. List A documents give an ongoing right to work with no time limit — a valid UK or Irish passport, a birth certificate combined with a National Insurance number, a Biometric Residence Permit with indefinite leave to remain. List B documents give a time-limited right to work and require a follow-up check before expiry.
Share code check: The employee provides a share code via the UK Visas and Immigration online service (gov.uk/prove-right-to-work). You enter the share code and the employee's date of birth on the employer checking service. The system produces a result showing whether the person has the right to work and — for time-limited rights — when that right expires. Print or save the result and keep it.
IDSP check: For British and Irish citizens, you can use a certified Identity Service Provider to verify identity digitally. The provider does the verification and provides you with a report. This is increasingly common for remote onboarding and can work well for drivers recruited without a face-to-face appointment.
The statutory excuse: what it gives you
Completing a right-to-work check correctly before employment gives you what the legislation calls a 'statutory excuse' against civil penalty if it later turns out the person was working illegally. The statutory excuse doesn't mean you can't be criminally prosecuted — if you knew or had reasonable cause to believe the person didn't have the right to work and employed them anyway, you can still face criminal liability. But it does protect you against the civil penalty if the check was done properly and the documents or share code appeared genuine at the time.
The statutory excuse only works if the check was done before the employment started, was done correctly, the documents were genuine-looking (you're not expected to be a forgery expert), and you kept the record. A retrospective check — done after employment started, or after a query was raised — provides a defence from the date of the late check, not from the date employment began. The gap period is still exposed.
Time-limited rights: the follow-up check most operators miss
This is the compliance failure I see most often in established fleets. A driver was employed in 2020 with a visa that had a time limit. The initial right-to-work check was done. The visa expiry date was noted. And then nobody set a reminder, and the driver kept working after their right to work lapsed.
Where a right to work is time-limited — a visa, a biometric residence permit with limited leave — you're required to carry out a repeat check before the right expires. If the right expires and the employee renews it, you check again and document the renewal. If they don't renew and you keep employing them, you've lost your statutory excuse and you're exposed to the civil penalty from the date the right lapsed.
Set calendar reminders for every time-limited right in your workforce. I add these to the fleet compliance calendar alongside vehicle MOTs and CPC expiry dates. When an expiry date approaches — I flag at 90 days — contact the driver, ask them to demonstrate their renewed right to work, carry out the check, and update the record. If they can't demonstrate a current right, employment must stop until they can.
Agency drivers: your responsibilities
When you engage an HGV driver through a reputable agency, the right-to-work check obligation sits with the agency as the employer. You shouldn't need to hold copies of the check documentation — that's the agency's file.
But: if you're using an agency that isn't conducting checks properly, and enforcement finds an illegal worker in your yard driving your vehicles, you're in the operational picture even if you're not legally liable for the civil penalty. And some smaller or less reputable agencies in the driver supply market are not rigorous. I ask agencies to confirm in writing that right-to-work checks are completed before any driver is supplied to me. That confirmation, kept on file, demonstrates due diligence even if the agency's own check later turns out to have been inadequate.
Keeping the records
Right-to-work check records must be kept for the duration of employment plus two years after employment ends. That's the statutory minimum. Keep either a clear copy of the document checked, a printout of the share-code check result, or the IDSP provider's report — whichever route you used. Date it and note who conducted the check.
For a fleet with regular driver turnover, this record-keeping adds up. A dedicated personnel file per driver, with the right-to-work record as one of the standard documents alongside the DVLA licence check and CPC card copy, keeps it manageable. If you use a digital HR or fleet management system, most of them have a field for right-to-work document copies and expiry date reminders.
Brexit and EU nationals
HGV driver shortages in the years following Brexit led many fleet operators to recruit heavily from EU nationals who had applied to the EU Settlement Scheme (EUSS). Those with settled status have indefinite leave to remain and an ongoing right to work — their share code check shows settled status with no expiry on work rights. Those with pre-settled status have a time-limited right. Pre-settled status was due to expire after five years but has been automatically extended in most cases — the share code check will show the current position accurately.
The important point: don't assume a driver you employed in 2021 under EUSS pre-settled status still has a clean right-to-work status in 2026 without checking. Use the share code system for any EU national employee — it's the reliable way to verify current status and it gives you a dated record of the check.
The bottom line
Right-to-work checks are simple, cheap to do, and the statutory penalty for not doing them is significant. Every driver who joins your fleet needs a check before day one. Every time-limited right needs a follow-up check before it expires. Every check needs to be documented and kept for two years after the employment ends.
Make it part of the new-starter checklist — licence check, CPC card copy, D4 medical if applicable, right-to-work check. Five minutes per new driver. Done properly, it's a piece of paper you hope you never need to use. Done wrong or not at all, it's a liability that can surface years after the gap opened.